Thermotec

Thermotec

Aktiivsed filtrid

ThermoTec 1" X 15' EXHAUST WRAP (SHORT ROLLS)
13,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 1" X 15' GRAPHITE BLACK EXH. WRAP
22,00 €
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
ThermoTec 1" X 50' CARBON FIBER EXH. WRAP
49,00 €

Hi-Tech Carbon Fiber appearance and Titanium like strength, Carbon Fiber Exhaust Insulating Wrap is produced utilizing pulverized Lava rock called basalt. It is extremely pliable, resistant to discoloration and can withstand 1800 degrees Fahrenheit in direct continuous contact. Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. MADE IN THE USA

ThermoTec 1" X 50' COPPER EXHAUST WRAP
38,00 €

Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology, by utilizing a new proprietary coating developed by Thermo-Tec; improved Thermal-Conduction-Technology (T-C-T). Generation II Copper Exhaust Wrap creates more horsepower and reduces under-hood temperatures, increases exhaust scavenging, withstands continuous heat up to 2000ºF, contains no asbestos. Generation II Copper Exhaust Wrap is sold in one or two inch wide, 50 foot rolls with a low profile 1/16" thickness.

ThermoTec 1" X 50' EXHAUST WRAP
34,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 1" X 50' GRAPHITE BLACK WRAP
37,00 €
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
ThermoTec 1" X 50' PLATINUM EXH. WRAP
50,00 €

The Platinum Exhaust Insulating wrap utilizes an exclusive hybrid construction featuring Thermal Conduction Technology (TCT™). The proprietary Weave Lock design provides durability and minimizes fraying. Made using volcanic rock which is naturally resistant to heat. Helps reduce underhood temperatures, can withstand radiant heat up to 1800°F and can add horsepower to your engine. Sold in 1 or 2 inch wide, 50 foot rolls.

ThermoTec 1" X 50' RICOCHET EXH. WRAP (BLACK)
51,00 €

Hi-Tech Carbon Fiber appearance and Titanium like strength, our Rogue Series Exhaust Insulating Wrap is produced utilizing pulverized Lava rock called basalt. It is extremely pliable, resistant to discoloration and can withstand 1800 degrees Fahrenheit in direct continuous contact. Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures.

ThermoTec 12 PACK SNAP STRAP KIT - 9"
41,00 €
The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap - and more. The high-temperature stainless steel straps are .275" (9/32") in width and have a narrow profile to fit tight spots. Snap Straps secure with easy-to-use slide-through fasteners. New precut lengths with tough multi-lock system.
ThermoTec 2" X 100' EXHAUST WRAP
136,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 100' GRAPHITE BLACK WRAP
141,00 €
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 15' EXHAUST WRAP (SHORT ROLLS)
21,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 15' GRAPHITE BLACK EXH. WRAP
31,00 €
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 25' EXHAUST WRAP
36,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 25' GRAPHITE BLACK WRAP
32,00 €
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 50' CARBON FIBER EXH. WRAP
74,00 €

Hi-Tech Carbon Fiber appearance and Titanium like strength, Carbon Fiber Exhaust Insulating Wrap is produced utilizing pulverized Lava rock called basalt. It is extremely pliable, resistant to discoloration and can withstand 1800 degrees Fahrenheit in direct continuous contact. Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. MADE IN THE USA

ThermoTec 2" X 50' COPPER EXHAUST WRAP
75,00 €

Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology, by utilizing a new proprietary coating developed by Thermo-Tec; improved Thermal-Conduction-Technology (T-C-T). Generation II Copper Exhaust Wrap creates more horsepower and reduces under-hood temperatures, increases exhaust scavenging, withstands continuous heat up to 2000ºF, contains no asbestos. Generation II Copper Exhaust Wrap is sold in one or two inch wide, 50 foot rolls with a low profile 1/16" thickness.

ThermoTec 2" X 50' EXHAUST WRAP
65,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 50' GRAPHITE BLACK WRAP
73,00 €
Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wraps surface. This coating controls heat build-up and dissipation.
ThermoTec 2" X 50' PLATINUM EXH. WRAP
84,00 €

The Platinum Exhaust Insulating wrap utilizes an exclusive hybrid construction featuring Thermal Conduction Technology (TCT™). The proprietary Weave Lock design provides durability and minimizes fraying. Made using volcanic rock which is naturally resistant to heat. Helps reduce underhood temperatures, can withstand radiant heat up to 1800°F and can add horsepower to your engine. Sold in 1 or 2 inch wide, 50 foot rolls.

ThermoTec 2" X 50' RICOCHET EXH. WRAP (BLACK)
81,00 €

Hi-Tech Carbon Fiber appearance and Titanium like strength, our Rogue Series Exhaust Insulating Wrap is produced utilizing pulverized Lava rock called basalt. It is extremely pliable, resistant to discoloration and can withstand 1800 degrees Fahrenheit in direct continuous contact. Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures.

ThermoTec 2-DUAL LAYER PLUG WIRE HEAT SHIELD
25,00 €

The Spark Plug Wire Heat Shield offers the ultimate protection for spark plug wires and boots from conductive and radiant heat. The dual-purpose sleeve has a surface that reflects over 90% of radiant heat, while the inside silica-based fabric prevents conductive heat from penetrating.

ThermoTec 4-6 CYL EXHAUST JACKET KIT
105,00 €

The new quick-wrap high-velocity Exhaust Jackets are an innovative way to insulate and block radiant heat. The jackets cover the tubes vertically allowing for a consistent fit. The fit allows the exhaust system to expand as it comes up to operating temperatures without restrictions and provides air space for added insulation. This product uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and can be applied with the headers in the vehicle. Can be installed with the headers mounted.

 

ThermoTec 4-CYL TURBO INSULATING KIT
146,00 €

The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger. This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications. Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of Exhaust Insulating Wrap 1" x 50' or 2" x 50', 1 yard of Aluminized Heat Barrier, and a 3" X 6" piece of Exhaust Insulating Wrap. Hardware and instructions are included.

ThermoTec 4-DUAL LAYER PLUG WIRE HEAT SHIELD
50,00 €

The Spark Plug Wire Heat Shield offers the ultimate protection for spark plug wires and boots from conductive and radiant heat. The dual-purpose sleeve has a surface that reflects over 90% of radiant heat, while the inside silica-based fabric prevents conductive heat from penetrating.

ThermoTec 4CYL & STR 6 HEADER MANIFOLD BLANKET 1-PC
122,00 €

This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source and can withstand direct heat up to 750 degrees Fahrenheit. The aluminized side, facing away, can handle radiant heat up to 2000 degrees Fahrenheit, offers protection from abrasion and harmful liquid spills. The Header Manifold Blanket is available in two sizes: (2) 20" by 24" blankets for V6 & V8 applications, and (1) 36" by 40" blanket for straight 6 & 4 cylinder engines.

ThermoTec 6 & 8-CYL TURBO INSULATING KIT
157,00 €

The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger. This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications. Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of Exhaust Insulating Wrap 1" x 50' or 2" x 50', 1 yard of Aluminized Heat Barrier, and a 3" X 6" piece of Exhaust Insulating Wrap. Hardware and instructions are included.

ThermoTec 6 PACK SNAP STRAP KIT - 18"
27,00 €
The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap - and more. The high-temperature stainless steel straps are .275" (9/32") in width and have a narrow profile to fit tight spots. Snap Straps secure with easy-to-use slide-through fasteners. New precut lengths with tough multi-lock system.
ThermoTec 6" X 100' EXHAUST WRAP
321,00 €
Exhaust Wrap is an innovative way to create more horsepower and reduce under-hood temperatures. The original Exhaust Insulating Wrap was developed over 30 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F, and contains no asbestos. Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
ThermoTec 8 CYL EXHAUST JACKET KIT
137,00 €

The new quick-wrap high-velocity Exhaust Jackets are an innovative way to insulate and block radiant heat. The jackets cover the tubes vertically allowing for a consistent fit. The fit allows the exhaust system to expand as it comes up to operating temperatures without restrictions and provides air space for added insulation. This product uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and can be applied with the headers in the vehicle. Can be installed with the headers mounted.

 

ThermoTec ALUMINIZED HEAT BARRIER 10 SQ. FT.
127,00 €

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The fabric side can handle temperatures in the range of 350-1200 degrees F. This product can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for manifolds or exhaust systems. This product can be cut to fit.

ThermoTec ALUMINIZED HEAT BARRIER 40" X 50'
2 117,00 €

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The fabric side can handle temperatures in the range of 350-1200 degrees F. This product can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for manifolds or exhaust systems. This product can be cut to fit.

ThermoTec BATTERY HEAT BARRIER KIT 40" X 8"
40,00 €

The World's only acid-neutralizing heat barrier mat. It reflects over 90% of radiant heat, traps and neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is inexpensive and easy to install. Acid-absorbing battery pad included for complete protection. The Battery Heat Barrier Kit is completely safe to handle before and during installation. It is used by all branches of the United States military. Part# 13200

ThermoTec CARBON FIBER PIPE SHIELD - 3.75" x 11.75" W/ CLAMPS
60,00 €
Rogue series clamp-on heat shieldsFor motorcycle and applications involving smaller pipes, the Rogue Series Clamp-On Heat Shields are Thermo-Tec's new and improved way to block exhaust heat.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and stainless stand offs and install in minutes. Clamp-On Heat Shields are available in 5.75" & 11.75" lengths.
ThermoTec CARBON FIBER PIPE SHIELD - 3.75" x 5.75" W/ CLAMPS
46,00 €
Rogue series clamp-on heat shieldsFor motorcycle and applications involving smaller pipes, the Rogue Series Clamp-On Heat Shields are Thermo-Tec's new and improved way to block exhaust heat.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and stainless stand offs and install in minutes. Clamp-On Heat Shields are available in 5.75" & 11.75" lengths.
ThermoTec COOL - IT MAT 24" X 48"
52,00 €
Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings. The Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a Mylar facing on one side and a foil facing on the other. The highly-reflective Mylar reflects heat up to 2000 degrees Fahrenheit away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a dual-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive. Available in three convenient sizes, including a 50' roll, Cool-It Mat is about 1/2" thick.
ThermoTec COOL - IT MAT 24" X 50'
645,00 €
Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings. The Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a Mylar facing on one side and a foil facing on the other. The highly-reflective Mylar reflects heat up to 2000 degrees Fahrenheit away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a dual-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive. Available in three convenient sizes, including a 50' roll, Cool-It Mat is about 1/2" thick.
ThermoTec COOL - IT MAT 48" X 48"
103,00 €
Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings. The Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a Mylar facing on one side and a foil facing on the other. The highly-reflective Mylar reflects heat up to 2000 degrees Fahrenheit away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. The silica blanketing is a dual-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive. Available in three convenient sizes, including a 50' roll, Cool-It Mat is about 1/2" thick.
ThermoTec COOL TUBE SHIELD
76,00 €

Keep your induction air cool with this unique lace up tube cover. The design of the cover allows it to fit from 2-1/2 inch to 3-1/2 inch air tubes up to 36 inches long. The lace on heat shield blocks over 98% of the radiant heat up to 2000 degrees and can withstand direct temperatures of 750 degrees Fahrenheit. The kit comes complete with four different color laces, blue, yellow, red and white. Part# 14500

 

ThermoTec COOL-IT PLUG WIRE SLEEVES-4 PACK BLACK
47,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-4 PACK BLUE
47,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-4 PACK RED
47,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-4 PACK SILVER
47,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-6 PACK BLACK
71,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-6 PACK BLUE
71,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-6 PACK RED
71,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec COOL-IT PLUG WIRE SLEEVES-6 PACK SILVER
71,00 €
This unique spark plug and ignition wire protector comes in four sporty colors; red, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most importantly - is non-flammable. Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6.
ThermoTec EXHAUST WRAP KIT 2" BLACK 1 ROLL
95,00 €
Now you can get everything you need for a complete, professional installation of our Exhaust Insulating Wrap, all in one package. Kits include Exhaust Insulating Wrap, Hi-Heat Coating and Snap Strap; available in Black and Original. Two sizes - one for motorcycles and 4Cyl, one for 6-8 Cyl application.
ThermoTec EXHAUST WRAP KIT 2" BLACK 2 ROLLS
181,00 €
Now you can get everything you need for a complete, professional installation of our Exhaust Insulating Wrap, all in one package. Kits include Exhaust Insulating Wrap, Hi-Heat Coating and Snap Strap; available in Black and Original. Two sizes - one for motorcycles and 4Cyl, one for 6-8 Cyl application.
ThermoTec EXHAUST WRAP KIT 2" REGULAR 1 ROLL
91,00 €
Now you can get everything you need for a complete, professional installation of our Exhaust Insulating Wrap, all in one package. Kits include Exhaust Insulating Wrap, Hi-Heat Coating and Snap Strap; available in Black and Original. Two sizes - one for motorcycles and 4Cyl, one for 6-8 Cyl application.