Aktiivsed filtrid
The 600-series sealed airbox is designed to fit all PX600 back plates and is ideal for vehicles where intake space is restricted.
Features:
Dramatically reduces intake temperatures
Reduction in intake noise - ideal for trackday regulations
78mm depth, designed for space-critical applications
Suitable for rampipes up to 45mm in height
Replaceable foam Pipercross filter, with 100mm alloy air intake
Also available without filter
Designed for road and competition single carbs, the PX300 consists of a lightweight ring plate bonded to a high performance air filter element. The element is made from reticulated foam in a triple layer laminate, with the filter being supported internally by a metal cage. The PX300 is designed for use on a large range of carburettors as the baseplates are ordered separately to ensure the best combinations for your engine. When ordering elements, please fit the largest possible, allowing a 19mm gap between the trumpet mouth or carb face and the inner face of the filter.
??
Designed for road and competition single carbs, the PX300 consists of a lightweight ring plate bonded to a high performance air filter element. The element is made from reticulated foam in a triple layer laminate, with the filter being supported internally by a metal cage. The PX300 is designed for use on a large range of carburettors as the baseplates are ordered separately to ensure the best combinations for your engine. When ordering elements, please fit the largest possible, allowing a 19mm gap between the trumpet mouth or carb face and the inner face of the filter.
??
Designed for road and competition single carbs, the PX300 consists of a lightweight ring plate bonded to a high performance air filter element. The element is made from reticulated foam in a triple layer laminate, with the filter being supported internally by a metal cage. The PX300 is designed for use on a large range of carburettors as the baseplates are ordered separately to ensure the best combinations for your engine. When ordering elements, please fit the largest possible, allowing a 19mm gap between the trumpet mouth or carb face and the inner face of the filter.
??
Mikuni 40/50 PHH Weber carb baseplate (C3101)
S.K. 40 / 45 / 47 / 50 DBS Weber carb baseplate (C3101)
Solex 40 ADDHE Weber carb baseplate (C3101)
Solex 40 DAA Weber carb baseplate (C3101)
Solex 45 ADDHE Weber carb baseplate (C3101)
Solex 45 DHH Weber carb baseplate (C3101)
External Length 435mm
External Width 190mm
External Height 40mm
Internal Height 25mm
BHP Rating 210
Base plate sold seperately.
These high performance air filters are for twin side draught carburettors and throttle bodies.
Designed for both competition and road use, the PX600 is available for Delloro DHLA, Weber DCOE and DCO/SP Carburettors as well as Weber Alpha, Jenvey throttle bodies and other custom applications. The filters are the same but the baseplate is application specific.
This performance air filter is supported internally by an expanded metal cage, the base plate is available separately and made in aluminium.
Always fit the largest filter possible for your application and ensure that there is a minimum of 19mm between the trumpet mouth and the inner face of the filter.
External Length 435mm
External Width 190mm
External Height 55mm
Internal Height 40mm
BHP Rating 230
Base plate sold seperately.
These high performance air filters are for twin side draught carburettors and throttle bodies.
Designed for both competition and road use, the PX600 is available for Delloro DHLA, Weber DCOE and DCO/SP Carburettors as well as Weber Alpha, Jenvey throttle bodies and other custom applications. The filters are the same but the baseplate is application specific.
This performance air filter is supported internally by an expanded metal cage, the base plate is available separately and made in aluminium.
Always fit the largest filter possible for your application and ensure that there is a minimum of 19mm between the trumpet mouth and the inner
External Length 435mm
External Width 190mm
External Height 80mm
Internal Height 65mm
BHP Rating 250
Base plate sold seperately.
These high performance air filters are for twin side draught carburettors and throttle bodies.
Designed for both competition and road use, the PX600 is available for Delloro DHLA, Weber DCOE and DCO/SP Carburettors as well as Weber Alpha, Jenvey throttle bodies and other custom applications. The filters are the same but the baseplate is application specific.
This performance air filter is supported internally by an expanded metal cage, the base plate is available separately and made in aluminium.
Always fit the largest filter possible for your application and ensure that there is a minimum of 19mm between the trumpet mouth and the inner
External Length 435mm
External Width 190mm
External Height 115mm
Internal Height 100mm
BHP Rating 300
Base plate sold seperately.
These high performance air filters are for twin side draught carburettors and throttle bodies.
Designed for both competition and road use, the PX600 is available for Delloro DHLA, Weber DCOE and DCO/SP Carburettors as well as Weber Alpha, Jenvey throttle bodies and other custom applications. The filters are the same but the baseplate is application specific.
This performance air filter is supported internally by an expanded metal cage, the base plate is available separately and made in aluminium.
Always fit the largest filter possible for your application and ensure that there is a minimum of 19mm between the trumpet mouth and the inner
Pipercross aluminium blank plate to allow the custom carburettor fitments & spacing.
Supplied with locking fastener bases.
Width 190mm
Length 435mm
Exernal depth 90mm
Internal depth 65mm
Width 190mm
Length 435mm.
Fixings for backplate included.
Note ??? these filters require the use of a suitable backplate.
Exernal depth 120mm
Internal depth 90mm
Width 190mm
Length 435mm.
Supplied with the fasteners to retain the filter to the backplate.
Note ??? these filters require the use of a suitable backplate.
Exernal depth 150mm
Internal depth 125mm
Width 190mm
Length 435mm.
Supplied with the fasteners to retain the filter to the backplate.
Note ??? these filters require the use of a suitable backplate.
The 600-series sealed airbox is designed to fit all PX600 back plates and is ideal for vehicles where intake space is restricted.
Features:
Dramatically reduces intake temperatures
Reduction in intake noise - ideal for trackday regulations
78mm depth, designed for space-critical applications
Suitable for rampipes up to 45mm in height
Replaceable foam Pipercross filter, with 75mm alloy air intake
Also available without filter
The 600-series sealed airbox is designed to fit all PX600 back plates and is ideal for vehicles where intake space is restricted.
Features:
Dramatically reduces intake temperatures
Reduction in intake noise - ideal for trackday regulations
78mm depth, designed for space-critical applications
Suitable for rampipes up to 45mm in height
Replaceable foam Pipercross filter, with 75mm alloy air intake
Also available without filter
The 600-series sealed airbox is designed to fit all PX600 back plates and is ideal for vehicles where intake space is restricted.
Features:
Dramatically reduces intake temperatures
Reduction in intake noise - ideal for trackday regulations
78mm depth, designed for space-critical applications
Suitable for rampipes up to 45mm in height
Replaceable foam Pipercross filter, with 100mm alloy air intake
Also available without filter
