CARSHOP.EE will be closed from 24.07.2019 – till 27.07.2019 for midsummer holidays. All stock orders will be shipped on 28.07.2019.

Kuumatõkked

Kuumatõkked

Aktiivsed filtrid

ThermoTec ALUMINIZED HEAT BARRIER 10 SQ. FT.
127,00 €

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The fabric side can handle temperatures in the range of 350-1200 degrees F. This product can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for manifolds or exhaust systems. This product can be cut to fit.

ThermoTec ALUMINIZED HEAT BARRIER 40" X 50'
2 117,00 €

The Aluminized Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly-reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The fabric side can handle temperatures in the range of 350-1200 degrees F. This product can be installed using standard rivets with a backup washer or weather strip adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for manifolds or exhaust systems. This product can be cut to fit.

ThermoTec BATTERY HEAT BARRIER KIT 40" X 8"
40,00 €

The World's only acid-neutralizing heat barrier mat. It reflects over 90% of radiant heat, traps and neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is inexpensive and easy to install. Acid-absorbing battery pad included for complete protection. The Battery Heat Barrier Kit is completely safe to handle before and during installation. It is used by all branches of the United States military. Part# 13200

ThermoTec CARBON FIBER PIPE SHIELD - 3.75" x 11.75" W/ CLAMPS
60,00 €
Rogue series clamp-on heat shieldsFor motorcycle and applications involving smaller pipes, the Rogue Series Clamp-On Heat Shields are Thermo-Tec's new and improved way to block exhaust heat.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and stainless stand offs and install in minutes. Clamp-On Heat Shields are available in 5.75" & 11.75" lengths.
ThermoTec CARBON FIBER PIPE SHIELD - 3.75" x 5.75" W/ CLAMPS
46,00 €
Rogue series clamp-on heat shieldsFor motorcycle and applications involving smaller pipes, the Rogue Series Clamp-On Heat Shields are Thermo-Tec's new and improved way to block exhaust heat.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and stainless stand offs and install in minutes. Clamp-On Heat Shields are available in 5.75" & 11.75" lengths.
ThermoTec COOL TUBE SHIELD
76,00 €

Keep your induction air cool with this unique lace up tube cover. The design of the cover allows it to fit from 2-1/2 inch to 3-1/2 inch air tubes up to 36 inches long. The lace on heat shield blocks over 98% of the radiant heat up to 2000 degrees and can withstand direct temperatures of 750 degrees Fahrenheit. The kit comes complete with four different color laces, blue, yellow, red and white. Part# 14500

 

ThermoTec GOLD HEAT BARRIER 12" X 24" W/ADH
41,00 €
An excellent Heat Reflective Material, the 24 K Heat Barrier helps protect vital engine components and provides a reflective barrier against radiant heat up to 2000°F. Helps lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. MADE IN THE USA
ThermoTec GOLD HEAT BARRIER 24" X 24" W/ADH
81,00 €
An excellent Heat Reflective Material, the 24 K Heat Barrier helps protect vital engine components and provides a reflective barrier against radiant heat up to 2000°F. Helps lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. MADE IN THE USA
ThermoTec GOLD HEAT BARRIER 24" X 50' W/ ADH
2 027,00 €
An excellent Heat Reflective Material, the 24 K Heat Barrier helps protect vital engine components and provides a reflective barrier against radiant heat up to 2000°F. Helps lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. MADE IN THE USA
ThermoTec GOLD THERMO-SHIELD 1 1/2 X 15
47,00 €
An excellent Heat Reflective Material, the 24 K Heat Barrier helps protect vital engine components and provides a reflective barrier against radiant heat up to 2000°F. Helps lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. MADE IN THE USA
ThermoTec HEAT BARRIER 12" X 12" ADHESIVE BACKED
17,00 €
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The adhesive backed side handles direct and continuous temperatures up to 300ºF. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
ThermoTec HEAT BARRIER 12" X 24" ADHESIVE BACKED
30,00 €
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The adhesive backed side handles direct and continuous temperatures up to 300ºF. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
ThermoTec HEAT BARRIER 12" X 50' ADHESIVE BACKED
754,00 €
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The adhesive backed side handles direct and continuous temperatures up to 300ºF. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
ThermoTec HEAT BARRIER 24" X 36" ADHESIVE BACKED
81,00 €
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The adhesive backed side handles direct and continuous temperatures up to 300ºF. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
ThermoTec HEAT BARRIER 24" X 48" ADHESIVE BACKED
108,00 €
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The adhesive backed side handles direct and continuous temperatures up to 300ºF. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
ThermoTec HEAT BARRIER 24" X 50' ADHESIVE BACKED
1 345,00 €
The Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000°F. The adhesive backed side handles direct and continuous temperatures up to 300ºF. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.
ThermoTec MUFFLER OR CATALYTIC CONV HEAT SHIELD KIT
107,00 €

The Muffler/Catalytic Converter Heat Shield is made up of woven silica with a flexible Mylar finish that protects against radiant heat up to 2000 degrees and can withstand direct continuous temperatures of 750 degrees Fahrenheit. The highly-reflective heat shield can be installed between the catalytic converter, muffler, or any other component to reflect radiant heat away from the undercarriage of the car. This versatile heat shield has an unlimited number of applications. The kit includes all necessary fasteners. Part# 16500

ThermoTec PIPE SHIELD - 1 FT. X 6" W/4" CLAMPS
49,00 €
Clamp-On Heat Shields incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs and installs in minutes. Clamp-On Heat Shields are available in one, two and three foot lengths.For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5". For motorcycle and applications involving smaller pipe, consider the 11650 and 11660 of which are designed for 2" exhaust.
ThermoTec PIPE SHIELD - 1FT. X 6"
46,00 €
Clamp-On Heat Shields incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs and installs in minutes. Clamp-On Heat Shields are available in one, two and three foot lengths.For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5". For motorcycle and applications involving smaller pipe, consider the 11650 and 11660 of which are designed for 2" exhaust.
ThermoTec PIPE SHIELD - 2 FT. X 6"
69,00 €
Clamp-On Heat Shields incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs and installs in minutes. Clamp-On Heat Shields are available in one, two and three foot lengths.For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5". For motorcycle and applications involving smaller pipe, consider the 11650 and 11660 of which are designed for 2" exhaust.
ThermoTec PIPE SHIELD - 2 FT. X 6" W/4" CLAMPS
75,00 €
Clamp-On Heat Shields incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs and installs in minutes. Clamp-On Heat Shields are available in one, two and three foot lengths.For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5". For motorcycle and applications involving smaller pipe, consider the 11650 and 11660 of which are designed for 2" exhaust.
ThermoTec PIPE SHIELD - 3 FT. X 6"
93,00 €
Clamp-On Heat Shields incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs and installs in minutes. Clamp-On Heat Shields are available in one, two and three foot lengths.For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5". For motorcycle and applications involving smaller pipe, consider the 11650 and 11660 of which are designed for 2" exhaust.
ThermoTec PIPE SHIELD - 3 FT. X 6" W/4" CLAMPS
101,00 €
Clamp-On Heat Shields incorporate Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and new stainless stand offs and installs in minutes. Clamp-On Heat Shields are available in one, two and three foot lengths.For exhaust pipes that exceed 3.5", use the 4" clamps of which will accommodate up to 4.5". For motorcycle and applications involving smaller pipe, consider the 11650 and 11660 of which are designed for 2" exhaust.
ThermoTec RICOCHET PIPE SHIELD - 3.75" x 11.75" W/ CLAMPS
60,00 €
Rogue series clamp-on heat shieldsFor motorcycle and applications involving smaller pipes, the Rogue Series Clamp-On Heat Shields are Thermo-Tec's new and improved way to block exhaust heat.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and stainless stand offs and install in minutes. Clamp-On Heat Shields are available in 5.75" & 11.75" lengths.
ThermoTec RICOCHET PIPE SHIELD - 3.75" x 5.75" W/ CLAMPS
46,00 €
Rogue series clamp-on heat shieldsFor motorcycle and applications involving smaller pipes, the Rogue Series Clamp-On Heat Shields are Thermo-Tec's new and improved way to block exhaust heat.The high-tech composite construction of this heat shield provides the ultimate in protection. The kits come complete with all clamps and stainless stand offs and install in minutes. Clamp-On Heat Shields are available in 5.75" & 11.75" lengths.
ThermoTec STAINLESS STEEL PIPE SHIELD 1 FT. X 6"
71,00 €

Stainless Steel Clamp-On Heat Shield incorporates Thermo-Tec proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Stainless Steel Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The Stainless Steel construction of this heat shield provides the ultimate in protection. Comes complete with all clamps and new stainless stand offs. Easily installs in minutes. Stainless Steel Clamp-On Heat Shields are available in one and two foot lengths.

ThermoTec STAINLESS STEEL PIPE SHIELD 2 FT. X 6"
101,00 €

Stainless Steel Clamp-On Heat Shield incorporates Thermo-Tec proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Stainless Steel Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust.The Stainless Steel construction of this heat shield provides the ultimate in protection. Comes complete with all clamps and new stainless stand offs. Easily installs in minutes. Stainless Steel Clamp-On Heat Shields are available in one and two foot lengths.

ThermoTec STARTER HEAT SHIELD (7" X 22" WRAP KIT)
40,00 €

In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a highly-reflective mylar surface. The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts. The Starter Heat Shield is a universal kit that fits all starters and does include 2) 24" Snap-Straps for ease of installation. Part# 14150

ThermoTec THERMO-SHIELD 1 1/2" X 15' ROLL
34,00 €

Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST. The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 deg F.

ThermoTec THERMO-SHIELD 2" X 50' ROLL
78,00 €

Thermo-Shield protects hoses and wires from radiant heat. Thermo-Shield is used in applications where it is difficult or not practical to disconnect one end of the hose or wire. NOT FOR USE ON EXHAUST. The adhesive-backed composite construction tape can easily be wrapped around the hose or wire to make a clean, professional appearance and protect parts from over 90% of radiant heat up to 2000 deg F.

ThermoTec ULTRA-LITE INSULATING MAT 10" X 18"
140,00 €
The Ultra-Lite Insulating Mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temp silica felt center and a durable mylar composite facing. The Heat Terminator uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and is available in six popular sizes.
ThermoTec ULTRA-LITE INSULATING MAT 18" X 18"
170,00 €
The Ultra-Lite Insulating Mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temp silica felt center and a durable mylar composite facing. The Heat Terminator uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and is available in six popular sizes.
ThermoTec ULTRA-LITE INSULATING MAT 18" X 24"
180,00 €
The Ultra-Lite Insulating Mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temp silica felt center and a durable mylar composite facing. The Heat Terminator uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and is available in six popular sizes.
ThermoTec ULTRA-LITE INSULATING MAT 24" X 24"
192,00 €
The Ultra-Lite Insulating Mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temp silica felt center and a durable mylar composite facing. The Heat Terminator uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and is available in six popular sizes.
ThermoTec ULTRA-LITE INSULATING MAT 24" X 36"
205,00 €
The Ultra-Lite Insulating Mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temp silica felt center and a durable mylar composite facing. The Heat Terminator uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and is available in six popular sizes.
ThermoTec ULTRA-LITE INSULATING MAT 8" X 12"
97,00 €
The Ultra-Lite Insulating Mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite surface on one side, with a high-temp silica felt center and a durable mylar composite facing. The Heat Terminator uses Thermal Conduction Technology (TCT), developed by Thermo-Tec, and is available in six popular sizes.