Kütuserõhu regulaatorid
Kütuserõhu regulaatorid
Subcategories
Aktiivsed filtrid
FPR800 - 2017 - 1/8NPT-Black
FPR800 - 2017 - 1/8NPT-Blue
FPR800 - 2017 - Purple
FPR800 - 2017 - Red
FPR800 - NPT - Sleeper
GB Fuel Pressure Regulator 2.75-5.15 bar
- Fuel pressure regulator for EFI 1:1
- 2.75-5.15 bar?? 40-75 psi
- 2pcs AN10 ORB inlet
- 1pcs AN6 ORB outlet
- 1/8 NTP for gauge
- gasoline and ethanol
Features:
- Adjustable fuel regulation from 4-1/2 to 9 psi
- Preset to 7psi
- 3/8??? NPT ports (1 in, 1 out, 1 bypass or return)
- Used in systems with a return line back to the fuel tank
- Quieter fuel pump operation
- Designed only for carburetor use
- Chrome finish
- Mounting bracket included
Holley fuel pressure regulators are designed to precisely control the fuel pressure from the fuel pump to the carburetor. Too much fuel pressure for a given needle and seat assembly can overload the needle and seat and may cause flooding or drivability problems. Each Holley fuel pressure regulator is fully adjustable so regulating the fuel pressure to your engines needs is a simple task. All Holley regulators are pre-set at the factory at 2.8 PSI so there is no guesswork when first installing the regulator. The Holley 12-804 fuel pressure regulator features 3/8" NPT in/out ports.
- Features:
- Adjustable fuel regulation from 1 to 4 psi
- .220" (7/32") restriction
- 3/8" NPT ports ( 1 in, 2 out)
- Chrome finish
- Mounting bracket included
- Pre-set at 2.8 PSI
Holley fuel pressure regulators are designed to precisely control the fuel pressure from the fuel pump to the carburetor. Too much fuel pressure for a given needle and seat assembly can overload the needle and seat and may cause flooding or drivability problems. Each Holley fuel pressure regulator is fully adjustable so regulating the fuel pressure to your engines needs is a simple task. All Holley regulators are pre-set at the factory so there is no guesswork when first installing the regulator. The Holley 12-803 fuel pressure regulator features 3/8" NPT in/out ports.
- Features:
- Adjustable fuel regulation from 4-1/2 to 9 psi
- .220" (7/32") restriction
- 3/8" NPT ports ( 1 in, 2 out)
- Chrome finish
- Mounting bracket included
- Features:
- Adjustable from 4.5-9 psi for precise fuel pressure adjustments
- Constructed of billet aluminum with a black anodized base and clear anodize top for good looks
- Used in systems with a return line back to tank
- Use with electric pumps only
- (1) -10 an o-ring inlet, (1) -10 an o-ring outlet, (1) -8 an o-ring return
- 1/8" NPT gauge port
- Designed for use with the Holley?? Dominator??? in-line fuel pumps or other high pressure pumps where return line is needed
- Mounting bracket included
- Hot Street/Race EFI Applications??
- Two Port
- Adjustable from 15 to 65 PSI
- Boost reference - 1:1
- Street/Strip Carbureted Applications??
- Two Port
- Adjustable from 4.5 to 9 PSI
Holley?? Billet Fuel Pressure Regulators are part of a complete line of fuel system products from Holley??. They are precision machined from 6061-T6 billet aluminum for strength and durability. They feature a black bright dip anodized body and a clear bright dip anodized top for corrosion resistance and good looks. The Holley 12-845 fuel pressure regulator features (1) -8 AN O-ring inlet, (1) -8 AN O-ring outlet, (1) -6 AN O-ring return.
Holley REGULATOR DIAPHRAGM REPAIR KIT
Replacement fuel pressure regulator diaphragm repair kit for Holley 12-803 and 12-804 fuel pressure regulators.
Features:
- Diaphragm repair kit for 12-803 or 12-804 fuel pressure regulators
- Includes diaphragm, low and high pressure springs
- Street/Strip EFI Applications??
- Fits 1985-92 5.0/5.7L TPI Camaro/Firebird
- Adjustable from 35 to 65 PSI
Holley fuel injection pressure regulators are designed to provide the correct fuel pressure for any high performance fuel injected vehicle. Regulators for dedicated applications are offered in various colors. These each feature a range of adjustability from 35-65 PSI. They are made to bolt in the stock location, so installation is a snap!
MALLORY 2-PORT NON-BYPASS REGULATOR 4-12 PSI
Mallory's Fuel Pressure Regulators are designed to deliver consistent fuel pressure throughout all ranges and loads of the engine. Mallory starts with a billet aluminum housing that is machined to precise tolerances.
Features:
Max inlet is 20-psi
Adjustable from 4-12-psi
Inlet and outlet are 3/8" NPT
Max flow of 200 GPH
MALLORY 3-PORT BYPASS REGULATOR 3-12 PSI
Mallory's Fuel Pressure Regulators are designed to deliver consistent fuel pressure throughout all ranges and loads of the engine. Each Regulator is supplied with a sturdy mount and hardware for easy, secure installation.
Features:
Unlimited inlet pressure
Adjustable from 3-12-psi
Inlet, Outlet and Return are 3/8" NPT
Max flow of 200 GPH
MALLORY 4-PORT BYPASS REGULATOR 3-25 PSI
Mallory's Fuel Pressure Regulators are designed to deliver consistent fuel pressure throughout all ranges and loads of the engine. Mallory starts with a billet aluminum housing that is machined to precise tolerances. Each Regulator is supplied with a sturdy mount and hardware for easy, secure installation.
Features:
Unlimited inlet pressure
Adjustable from 3-25-psi
Inlet and Return are 3/4"-16 (-8an)
Outlet size is 3/8" NPT
MALLORY 4-PORT NON-BYPASS REGULATOR 4-12 PSI
Mallory's Fuel Pressure Regulators are designed to deliver consistent fuel pressure throughout all ranges and loads of the engine. Each Regulator is supplied with a sturdy mount and hardware for easy, secure installation.
Features:
Max inlet is 20-psi
Adjustable from 4-12-psi
Inlet is 7/8-14 (-10AN)
Outlet is 3/4"-16 (-8AN) and 7/8"-14 (10AN)
Max flow of 500 GPH
Use with PN 29269 Fuel Pump Gas Only
Mallory Comp Pump Fuel Pumps 5110FI
Mallory Comp Pump Series electric fuel pumps are ideal for high performance street or race applications. They have a high-quality, permanent-magnet 12 V electric motor and feature factory-set base pressure. Intended for gasoline use, each pump assembly features a quiet, high-efficiency Gerotor design that provides stable output. The housings are fully machined and have a special design that allows for some adjustment of the output pressure. All Comp Pump Series fuel pumps must be used with a fuel pressure regulator. The pumps are available in many different ratings, from 60 to 500 gph, with fuel pressure ranging from 4 to 100 psi. They're perfect for any carbureted or fuel injected engine.
Mallory fuel pressure regulator 4-12PSI
TOOTMINE LÕPETATUD
asendustoode Mallory 29387
Mallory Fuel Pressure Regulator 4-25PSI
TOOTMINE LÕPETATUD
asendustoode Mallory 29388
MALPASSI 67MM FILTER KING WITH ALLOY BOWL 8MM UNIONS
These fuel pressure regulators have been part of a competition fuel system, and a common sight on motorsport vehicles over the past 25 years.
The FILTER KING is a popular unit, regularly seen in the motorsport field because of its ability to regulate and filter fuel without restriction, it is available in two different sizes and in a choice of either a Transparent or Alloy Bowl to suit the customer???s requirements.
- Height:- 120mm
- Width:- 100mm
- Weight:- 370 gms
- Filter Micron:- 10
- Unions:- 8mm
- Pressure Range:-?? 1-7 psi
- Diameter 85 mm
- For applications with carburetted?? ?? ?? aspirated engines
- Compatible with alcoholed fuel (E85)
- 1 x IN connector, 8 mm tail
- 1 x OUT connector, 8 mm tail
- Paper filter element
- Alloy bowl
- Supplied with bracket and bolts for easy fitting
- Diameter 85 mm
- For applications with carburetted?? ?? ?? aspirated engines
- Compatible with alcoholed fuel (E85)
- 1 x IN connector, 8 mm tail
- 1 x OUT connector, 8 mm tail
- Paper filter element
- Alloy bowl
- Supplied with bracket and bolts for easy fitting
MALPASSI PETROL KING FPR008B (8MM TAILS)
- Adjustment Range:- 1.5-5psi
- Unions:- 8mm Push on tails
- Suitable for :- Petrol / E10 / E85 & Diesel
- Width inc Bracket:- 83mm
- Height:-60mm
- Wieght:- 165gms
MALPASSI PETROL KING FPR008C (10MM TAILS)
- Adjustment Range:- 1.5-5psi
- Unions 10mm Push On
- Suitable for :- Petrol / E10 & Diesel
- Width inc Bracket:- 83mm
- Height:-60mm
- Wieght:- 165gms
MALPASSI PETROL KING FPR008D (JIC6 UNIONS)
- Adjustment Range:- 1.5-5psi
- Unions:- JIC6 Male Unions
- Suitable for :- Petrol / E10 / E85 & Diesel
- Width inc Bracket:- 83mm
- Height:-60mm
- Wieght:- 165gms
MALPASSI TURBO FUEL PRESSURE REGULATOR
Designed to complement a carburettor engine utilizing a pressurized turbo charged system.
This regulator senses inlet manifold pressure changes, and manages the engine's fueling requirements by regulating the fuel pressure accordingly.
- Input Injection Pump :- OTP017 (3 Bar Pump)
- Output Fuel Pressure:- 5psi + Boost Pressure (Adjustable)
- Ratio:- 1:1
- Width:- 105mm
- Height:- 80mm
- Weight:- 198gms
MALPASSI TURBO FUEL PRESSURE REGULATOR
Designed to complement a carburettor engine utilizing a pressurized turbo charged system.
This regulator senses inlet manifold pressure changes, and manages the engine's fueling requirements by regulating the fuel pressure accordingly.
- Input Injection Pump :- OTP017 (3 Bar Pump)
- Output Fuel Pressure:- 5psi + Boost Pressure (Adjustable)
- Ratio:- 1:1
- Width:- 105mm
- Height:- 80mm
- Weight:- 198gms
SYTEC FUEL PRESSURE GAUGE 0-15PSI
- Pressure 0-15 Psi (0-1 Bar)
- Dial:- Dual (Psi & Bar)
- Connection:-Bottom entry
- Thread:- 1/8th nptf
SYTEC PRO-FUEL PRESSURE REGULATOR (10MM UNIONS)
- Adjustable low pressure chrome regulator with sprung loaded bezel adjustment.
- Pressure Adjustment range:- 1-5 psi
- Max Input Pressure:- 7 psi
- Max Flow:- 150 lph
SYTEC PRO-FUEL PRESSURE REGULATOR (6MM UNIONS)
- Adjustable low pressure chrome regulator with sprung loaded bezel adjustment.
- Pressure Adjustment range:- 1-5 psi
- Max Input Pressure:- 7 psi
- Max Flow:- 150 lph
SYTEC PRO-FUEL PRESSURE REGULATOR (8MM UNIONS)
- Adjustable low pressure chrome regulator with sprung loaded bezel adjustment.
- Pressure Adjustment range:- 1-5 psi
- Max Input Pressure:- 7 psi
- Max Flow:- 150 lph