MOTIP Brake Caliper Spray Silver 400ml
  • MOTIP Brake Caliper Spray Silver 400ml

MOTIP Brake Caliper Spray Silver 400ml

€16.27
MOTIP 04096
Qty

Lacquer to highlight brake pads. The lacquer has good filling properties and a lasting gloss. The lacquer is scratch free, shock proof and resistant to petrol, chemicals and weather influences, and is rust and dirt preventive. MoTip Tuning Line Brake Caliper Spray is available in four colours.
0.30 kg

Physical and Chemical Characteristics
Contents : 400 ml
Base : Alkyd resin
Colour : Red
VOC-content : Approximately 79% w/w
Solid content : Approximately 21% w/w
Gloss : High gloss 90 at an angle of 60??
Coverage : 4 brake pads
Dust dry : After 30 tot 60 minutes
Tack free : After 3 hours
Hardened/re-sprayable : After 24 hours
Heat resistant : To 110??C
Peak : To 150??C
Usage
Before use, carefully read the directions on the packaging and act accordingly.
Pre Treatment
De surface should be clean, dry and free of fat. Remove loose old lacquer and rust and then sand. Apply a
layer of MoTip primer. After drying, sand the base layer (grain 600).
Treatment
The surface should be clean, dry and free of fat. The aerosol should have room temperature. Best
processing temperature 15 to 25??C. Before use, shake the aerosol for 2 minutes and spray a sample.
Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer
applied.

MOTIP 04096